Rocky Creek 12v Motopressor Tyre Inflator and Pressure Gauge

£49.99

The product has been added to your cart

PRODUCT DETAILS

Pressure Guage info:

One of the most important things YOU can do to your bike is run correct tyre pressures. Not only does it help improve fuel consumption, it improves handling and makes your tyres last longer. Few of us trust the gauges at Petrol Stations so why not carry your own tyre gauge! Many Petrol Station hoses are almost IMPOSSIBLE to connect to your valve stem. With the MotoPressor Tyre Gauge simply attach the Gauge to your valve stem and use the gauge as an inline gauge filling air through the Tyre Gauge. Simply clip the Motopressor Air Gauge onto any tyre valve stem and get an instant and accurate reading in PSI or KPA. Connect the Air Gauge to a Motopressor Pocket Pump and it instantly becomes an inline gauge. No need to switch between the gauge and air compressor hose! Added a little too much air to your tyre? Simply press the air bleed button and adjust to your desired pressure.

Specs:

·         Measures PSI or KPA

·         0-60 PSI/0-4.2 KPA read out

·         50mm analogue dial

·         300mm Braided flex hose

·         Push button air bleed valve

·         Protective rubber gauge guard

·         Self locking brass air chuck

·         Can be used inline with a motopressor pump

 

Motopressor Pump Info:

This is a great little pump. ULTRA compact, this stripped down pocket pump weighs in at only 580g and fits in the palm of your hand. Built around a custom modified 12 volt inflator. What it lacks in looks, it makes up for in performance and functionality – which is what you really need when you’re stranded in the middle of nowhere. 

MotoPressor has a 62cm long inflator hose, a 2m long power cord with an SAE fitting on the end and a hands-free, screw-on delivery valve that fits all bikes. Included is a battery cable with an SAE fitting at the end for you to connect into.  All this packs small into a heavy duty neoprene pouch. 

MotoPressor will pump the front tyre of your motorcycle from flat to around 32 psi and the rear to around 28psi in two (2) minutes (Tests run on a BMW R1200GS).  MotoPressor is capable of pumping over 100 psi! 

Use the MotoPressor Pocket Pump to inflate your tyres, anywhere, anytime, OVER and Over again.  

The MotoPressor Pocket Pump is CE approved meaning it meets the requirements as set out in European Directives that cover health, safety and environmental protection legislation.  We are so confident about the quality of our product that it is covered by a FIVE YEAR WARRANTY.

WARNING – Do not use this pump in a standard BMW accessory outlet, unless it is wired directly to the battery and bypasses the motorcycle’s electrical computer system, “CANbus”.  The CANbus monitors and limits the amperage of the accessory outlet.  When you plug the MotoPressor into a CANbus equipped accessory outlet the CANbus will automatically shut off the circuit and the MotoPressor will stop working.  It is not the fault of the Motopressor.

 

PRODUCT REVIEWS